阳极电沉积Ti/MnO2电极及其苯酚降解的电催化性能

应用阳极电沉积法制备钛基二氧化锰(Ti/MnO2)电极. 采用X射线衍射(XRD)、扫描电子显微镜(SEM)及能谱（EDS）表征电极结构形貌. 用V~logi及苯酚降解实验优化电极制备工艺参数：在电流密度4 mA•cm-2、Mn2+离子浓度0.5 mol•L-1及温度70 ℃条件下阳极电沉积Ti/MnO2电极. 以苯酚为目标有机物,评价该电极电催化氧化性能,降解7h降解效率达49.6%.     

真空蒸镀法制备锡薄膜及其嵌锂电化学性能

采用真空蒸镀法在铜片基底上沉积锡薄膜作为锂离子电池负极材料,对所制备的锡薄膜采用扫描电子显微镜、X射线衍射表征,研究了其表面形貌和组成。 将制备的薄膜在手套箱中组装成CR2032型钮扣式电池,进行电化学测试,研究其电化学性能。 实验结果表明,在相同蒸发时间和基底温度的条件下,随着蒸发功率的增加,沉积的锡颗粒逐渐增大,相应的电化学性能降低。 以蒸发功率200 W、基底温度150 ℃制得的样品粒径为100~200 nm,含有Cu6Sn5合金相,以0.2C倍率充放电循环20周后放电容量达527 mA·h/g。     

空心碳半球锂离子电池负极的高倍率性能研究

以聚苯乙烯球为模板,通过水热法包裹硬碳层,又用微波法迅速引发聚苯乙烯核裂解的两步反应,制备了高比表面的空心碳半球.采用扫描电镜和透射电镜观察材料形貌,并测试该负极的电化学性能.在高倍率充放电条件下,与石墨、中间相碳微球电极相比,空心碳半球显现出了更高的容量和优异的寿命.     

静电纺丝法制备La0.67Ba0.33MnO3微纳米纤维及其红外发射率研究

采用静电纺丝法结合溶胶-凝胶技术制备了钙钛矿型La_0.67Ba_0.33MnO₃微纳米纤维, 并利用差示扫描量热-热失重分析(DSC-TGA)、 X射线衍射(XRD)、 傅里叶变换红外光谱(FTIR)和扫描电子显微镜(SEM)等技术对产物进行了表征, 利用IR-2红外发射率测试仪测试了La_0.67Ba_0.33MnO₃在280~370 K范围内的红外发射率. 结果表明, La_0.67Ba_0.33MnO₃在600 ℃时已形成钙钛矿结构. 随着煅烧温度的升高, La_0.67Ba_0.33MnO₃的形貌由纤维状向三维网络状转变, 并最终失去纤维形态. 在280~370 K范围内, La_0.67Ba_0.33MnO₃微纳米纤维的红外发射率随温度升高而升高, 由0.564增加至0.689. 利用钙钛矿材料双交换理论解释了这一现象, 并进一步探讨了其在红外发射率可变材料中的应用前景.     

Carbon‐Encapsulated Tube‐Wire Co3O4/MnO2 Heterostructure Nanofibers as Anode Material for Sodium‐Ion Batteries

This study presents a general approach for the synthesis of carbon‐encapsulated wire‐in‐tube Co₃O₄/MnO₂ heterostructure nanofibers (Co₃O₄/MnO₂@C) via electrospinning followed by calcination. The as‐synthesized Co₃O₄/MnO₂@C is investigated as the sodium‐ion batteries anode material, which not only exhibits a high reversible capacity of 306 mAh g⁻¹ at 100 mA g⁻¹ over 200 cycles, but also shows a cycling stability of 126 mAh g⁻¹ after 1000 cycles at a high current density of 800 mA g⁻¹. The excellent electrochemical performance can be ascribed to the contribution from carbon‐encapsulated outer‐tube Co₃O₄ and inner‐wire MnO₂ heterostructures, which offer a large internal space and good electrical conductivity. The present work can be helpful in providing new insights into heterostructures for sodium‐ion batteries and other applications.     

组氨酸功能化石墨烯量子点@纳米硅负极材料的制备及电化学性能研究

以柠檬酸和组氨酸混合物为碳源采用高温热解法制备组氨酸功能化石墨烯量子点（CH-GQD）.CH-GQD是由平均尺寸仅为3.5 nm的石墨烯片组成,片的边缘含有丰富亲水基团,产品极易溶于水,具有强而稳定的荧光发射.将CH-GQD包覆于硅纳米粒子表面得到石墨烯量子点@硅复合物,以此复合物电极为负极、金属锂片为正极装配锂电池,并测试其电化学性能.研究表明,CH-GQD的引入使硅负极的电子转移阻抗下降超过14.7倍,电极与电解质之间的锂离子扩散系数提高310倍,减少了因硅与电解液分子发生副反应造成的储锂容量迅速衰减.CH-GQD@Si电池在50和1000 mA·g^-1恒电流下首次放电容量分别是3325和1119 mAh·g^-1.在100 mA·g^-1电流密度下循环100圈放电容量仍保持1454.4 mAh·g^-1.CH-GQD@Si的电池行为明显优于硅负极和柠檬酸和丙氨酸热解产生石墨烯量子点（CA-GQD）改性后的硅负极.由于CH-GQD和CA-GQD在结构上仅相差一个咪唑边缘基团,上述结果还证明咪唑基对提高复合物电极电化学性能发挥了重要作用.     

锂离子电池硅负极循环稳定性研究进展

硅是已知质量比容量最高的锂离子电池负极材料,研究人员希望通过制造可靠的高容量硅负极,生产高能量密度的锂离子电池. 但由于充放电过程中锂在硅材料中嵌入与释放,硅材料发生巨大的体积变化,以致破碎,并从负极上脱落下来. 硅负极容量随着充放循环次数的增加而迅速下降,是其应用进程中受到的最大制约. 本文结合锂离子电池硅负极研究现状,从硅材料本体结构、整体负极结构两方面介绍几种不同的提高硅负极循环稳定性的方法,并对各种方法的稳定性、成本、制备方法等进行比较,提出对未来硅负极材料研究的展望.     

铝作阳极电解氢氧化钠溶液的实验研究

铝是活泼金属,作为阳极电解氢氧化钠溶液理论上应该是铝失去电子成为铝离子溶解于氢氧化钠溶液。通过实验研究,可以得出铝作阳极电解氢氧化钠溶液实质是电解水。电解产生的氧气可以在铝电极表面形成一层不致密的氧化铝,所生成的氧化铝不溶于氢氧化钠溶液。     

Phase-field model for the two-phase lithiation of silicon

As an ideal anode material, silicon has the highest lithium-ion capacity in theory, but the broader application is limited by the huge volumetric strain caused by lithium insertion and extraction. To better understand the physical process and to resolve the related reliability issue, enormous efforts have been made. Recent experiments observed sharp reaction fronts in both crystalline and amorphous silicon during the first lithiation half-cycle. Such a concentration profile indicates that the process is likely to be reaction limited. Based on this postulation, a phase-field model is developed and implemented into a finite-element code to simulate the coupled large inelastic deformation and motion of the reaction front in a silicon electrode. In contrast to most existing models, the model treats both volumetric and deviatoric inelastic deformation in silicon as a direct consequence of the lithiation at the reaction front. The amount of deviatoric deformation is determined by using the recently developed kinetic model of stress-induced anisotropic reaction. By considering the role of stress in the lithiation process, this model successfully recovers the self-limiting phenomenon of silicon electrodes, and relates it to the local geometry of electrodes. The model is also used to evaluate the energy-release rate of the surface crack on a spherical electrode, and the result suggests a critical size of silicon nanoparticles to avert fracture. As examples, the morphology evolution of a silicon disk and a Si nanowire during lithiation are also investigated.     

Protection of Li metal anode by surface-coating of PVDF thin film to enhance the cycling performance of Li batteries

The PVDF thin film on the surface of the lithium metal can highly suppress the lithium dendrites.